Japanese tree saw with a pulling cut, curved blade and deep teeth for a quick cut with less effort.
Please note that a pulling cut means that the effort is made by pulling the saw towards you. Never force the saw by pushing it along the cut. If it gets stuck, you could break the blade !
330 mm blade made of Japanese steel.
Japanese teeth with 3 bevels.
Blade thickness : 1.2 mm for good rigidity.
Large kerf (saw cut) of 1.8 mm to reduce friction and effort.
Deep 7 mm teeth. Tooth spacing : 4 mm (7 teeth per inch).
For a quick and clean cut.
Offset tooth every 5 teeth to facilitate sawdust removal.
Tapered blade for easy insertion into tight forks : blade height at the base (handle side) : 4.8 cm. Blade height at the tip : 2 cm...
Equipped with an eyelet at the tip for storage on a hook.
Blades interchangeable with 2 screws.
Blade designed for pruning trees and shrubs.
Ergonomic wooden handle, 18 cm long (2 cm thick x 3 to 3.8 cm high), fitted with an eyelet for attaching a wrist strap or carabiner and a tail lug for a secure grip when cutting.
Please note that this saw is delivered without a sheath, just in a cardboard box.
We will soon be receiving a supply of sheaths for curved saws.
In the meantime, we recommend that you make your own sheath out of thick cardboard, folded over itself and secured with tape to protect your blade and prevent injury.
Total length of the tool (saw only) : 50.8 cm.
Total weight of the tool : 200 g.
SHOGUN brand.
Made in Japan.
