Japanese pull-cut tree saw.
300 mm long Japanese steel blade with nickel and chrome coating to prevent rust.
Blade thickness : 0.7 mm.
Blade width (cutting width) : 0.9 mm.
Blade height : from 1.6 cm at the thinnest to 3.7 cm at the widest.
Tooth height 4 mm. 9 teeth per inch (2.8 mm pitch).
Teeth treated with electric pulse for long life.
One special tooth in every eight to facilitate sawdust removal.
Fairly fine teeth and flexible blade that is difficult to break.
Economical interchangeable blades.
Ergonomic 15 cm ABS handle (grip length 10.5 cm) with carabiner loop.
Total length of tool : 47 cm
Weight of tool alone : 140 g.
Black plastic sheath, 37 cm long, open at the bottom and ventilated by holes at the back for water and debris removal, with a 6.5 cm high belt loop and carabiner loop. The saw locks into the sheath by means of a plastic jaw system at the top of the sheath, holding the handle in a vice-like grip.
Weight of the tool with plastic sheath : 270 g.
Total length of the tool with sheath : 48.5 cm.
The thinness of these blades is what makes them so useful. Work along the cutting axis to avoid breaking or bending the blade, and never force it by pushing.
We recommend the use of leather gloves when using these pull saws.
The blades can be changed by holding the tool by the blade with gloves and/or a cloth to avoid injury and tapping the handle on a hard surface that will not be damaged by impact.
TENJU brand.
Made in Japan.
